Datasheet_MagsonMA-6(EN)_2022-08.pdf 
MA Type 6H
Technical characteristics
| Size | 21/190 | 26/220 | 29/230 | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Material | PP (glass-fibre reinforced) / ETFE (carbon-fibre reinforced) | ||||||||
| Max. delivery head in [m.WG] 50 Hz | 21 | 26 | 29 | ||||||
| Max. volume flow in [l/min] 50Hz | 190 | 220 | 230 | ||||||
| Max. density in [g/cm3] 50Hz ** | 1.8 | 1.8 | 1.6 | ||||||
| Motor capacity in [kW] | 1.5 | 2.2 | 2.2 | ||||||
| Current rating (400V, 50Hz) in [A] | 3 | 4.2 | 4.2 | ||||||
| Rated speed in [rpm] at 50Hz /60Hz | 3000/3600 | ||||||||
| Suction port | DN 25 (G 1 1/2" possible) | ||||||||
| Discharge port | DN 25 (alternativ G 1 1/2") | ||||||||
| Voltage in [V] | DN 25 (G 1 1/2" possible) | ||||||||
| Protection class | IP 55 | ||||||||
| Max. flow velocity in [m/s] | côté aspiration = 1 / côté refoulement = 3 | ||||||||
| Approx. weight for PP/ETFE in [kg] | |||||||||
| Max. temperature for PP/ETFE in [°C] | 70/80 | ||||||||
| Max. system pressure for PP/ETFE at 20°C in [bar] | 6 | 6 | 6 | 6 | |||||
* Material used for housing, impeller unit and rear casing: (sheath of inner magnet made of PP without fibre reinforcement) ** approx. value at max. volume flow (higher density possible when flow rate is reduced)
Performance charts
Dimension sheet
Accessories
Motor accessories
- ON/OFF switch with 2.5m cable and plug (230V AC only)
- 5m three-phase connection cable with CEE plug of 5×16 A, fully assembled
- Frequency converter of IP class 65, mounted directly to the motor or for wall mounting
Slip-on flanges
to screw onto threaded ports including O-rings *
Thread adapters
to screw onto threaded ports including O-rings connecting with insert fitting and spigot nut *
Hose connections
Three-piece hose connections with spigot nut and hose nipple.
Also available are port seals, shut-off and check valves etc. suitable to any MAGSON pump. Our product specialists will be glad to help you!