Datasheet_MagsonMA-7(EN)_2022-08.pdf 
MA Type 7
Technical characteristics
| Size | 29/950 | 36/750 | 42/500 | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Material | PP (glass-fibre reinforced) | |||||||||
| Max. delivery head in [m.WG] 50 Hz | 29 | 36 | 42 | |||||||
| Max. volume flow in [l/min] 50Hz | 950 | 750 | 500 | |||||||
| Max. density in [g/cm3] 50Hz ** | 1 | 1.2 | 1 | 21 | 1 | 1 | ||||
| Motor capacity in [kW] | 4 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | ||||
| Current rating (400V, 50Hz) in [A] | 7.3 | 9.9 | 9.9 | 9.9 | 9.9 | 9.9 | ||||
| Rated speed in [rpm] at 50Hz /60Hz | 3000 | |||||||||
| Suction port | DN 65 | |||||||||
| Discharge port | DN 50 | |||||||||
| Voltage in [V] | 400/690 V CA triphasé | |||||||||
| Protection class | IP 55 | |||||||||
| Max. flow velocity in [m/s] | côté aspiration = 1 / côté refoulement = 3 | |||||||||
| Approx. weight for PP/ETFE in [kg] | ||||||||||
| Max. temperature for PP/ETFE in [°C] | 70 | |||||||||
| Max. system pressure for PP/ETFE at 20°C in [bar] | 6 | 6 | 6 | 6 | 6 | |||||
* Material used for housing, impeller unit and rear casing: (sheath of inner magnet made of PP without fibre reinforcement) ** approx. value at max. volume flow (higher density possible when flow rate is reduced)
Performance charts
Dimension sheet
Accessories
Motor accessories
- ON/OFF switch with 2.5m cable and plug (230V AC only)
- 5m three-phase connection cable with CEE plug of 5×16 A, fully assembled
- Frequency converter of IP class 65, mounted directly to the motor or for wall mounting
Slip-on flanges
to screw onto threaded ports including O-rings *
Thread adapters
to screw onto threaded ports including O-rings connecting with insert fitting and spigot nut *
Hose connections
Three-piece hose connections with spigot nut and hose nipple.
Also available are port seals, shut-off and check valves etc. suitable to any MAGSON pump. Our product specialists will be glad to help you!