Technical characteristics


Size	Type 4 - 13/115		Type 5 - 17/230		Type 6 - 27/470
Material	PP (glass-fibre reinforced) / ETFE (carbon-fibre reinforced)
Max. delivery head in [m.WG] 50 Hz	13		17		27
Max. volume flow in [l/min] 50Hz	115		230		470
Max. density in [g/cm3] 50Hz **	1.8	1.8	1	1.4	1.15	1.6	2
Motor capacity in [kW]	0.75		0.75	1.1	2.2	3	4
Current rating (400V, 50Hz) in [A]	1.56		1.56	2.25	2	5.6	7.3
Rated speed in [rpm] at 50Hz /60Hz	3000/3600
Suction port	DN 25 (Type 4) / DN 40 (Type 5) / DN 50 (Type 6)
Discharge port	DN 25 (Type 4) / DN 40 (Type 5) / DN 50 (Type 6)
Voltage in [V]	230/400V CA triphasé
Protection class	IP 55
Max. flow velocity in [m/s]	côté aspiration = 1 / côté refoulement = 3
Approx. weight for PP/ETFE in [kg]	24		26	29	42	54	62
Max. temperature for PP/ETFE in [°C]	70/60
Max. system pressure for PP/ETFE at 20°C in [bar]	2		2.2		4	4	5.2

* Material used for housing, impeller unit and rear casing: (sheath of inner magnet made of PP without fibre reinforcement) ** approx. value at max. volume flow (higher density possible when flow rate is reduced)

Performance charts

Dimension sheet

Accessories

Motor accessories

ON/OFF switch with 2.5m cable and plug (230V AC only)
5m three-phase connection cable with CEE plug of 5×16 A, fully assembled
Frequency converter of IP class 65, mounted directly to the motor or for wall mounting

Slip-on flanges

to screw onto threaded ports including O-rings *

Thread adapters

to screw onto threaded ports including O-rings connecting with insert fitting and spigot nut *

Hose connections

Three-piece hose connections with spigot nut and hose nipple.

Also available are port seals, shut-off and check valves etc. suitable to any MAGSON pump. Our product specialists will be glad to help you!